Want to know how to Install Car LED lights?

You are looking for how to Install Car LED lights? Then you are at the right place. So you’ve decided to Experiment your vehicle with a set of LED (Light Emitting Diode) light bulbs . Now LED lighting technology available for every conventional automotive lighting purpose. The LEDs are also creating new light features for automotive purposes, as the LEDs can be installed in ways and in locations that are impossible with incandescent and fluorescent lighting. LED have Fast response time and improve road safety. LED car lights compared to the ordinary lights has faster response time of 0.2-0.3 seconds. It equals to human reaction time. That greatly improves your road safety. Don’t Forget to drive safe

How to Install your LED Lights?

Step 1: Buy Goods

Firstly you should know what size you need? Then you’ll have to decide what color to get, since LEDs are available in a variety of colors. For colored lenses you’ll want a bulb that is the same color as the lens. If you have a clear lens you must use the proper color as required by law. For example: red for brakes and amber for turn signals. Then for Purchasing Car LED Lighting Accessories you can decide to go with a site called VanquishAuto.com

Step 2: Install

Be sure to not touch the bulbs with your bare hands. Next, remove your old sealed beams and put the new assembly in place of it. They should simply plug in and fit exactly the same as the old. Obviously, it will be different for each car. Insert the new LED Bulb. You should wired them into ignition wire and onto a switch on the dash. That way you could choose to have them on or off, but they would always be off when the car was off. LED bulbs are actually an open circuit (burnt out or missing bulb) and will cause an effect called “Hyper Flashing”, where the turn signals blink excessively fast. Other issues that may be caused from this low voltage include the Vehicle Information Center indicating you have a bulb malfunction and you may not be able to activate your cruise control anymore.

Step 3: Test

After installing the new headlights, then drove to an empty parking lot to aim them. You have to aimed them into what looked like a good pattern, but there is no way to know until you drive with them. Put the vehicle lights ON to check if the bulb turns on. Know more about how to Install other Car LED lights Visit  our website www.vanquishauto.com . Thank you for Patience.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s